Five-station tapping machine
Vertical rotary tapping machine with CNC control, servo tapping, torque monitoring, broken tap alarm, and mist handling.
Aerospace fastener machines
Dedicated equipment for tapping, drilling, square punching, and deburring aerospace fasteners.
Mitsubishi / KND controlsServo indexingAutomatic lubrication
Bolt drilling machine
Vertical drilling machine for bottom-hole preparation, with servo drilling head and automatic feeding by bowl and linear feeder.
Square punching machine
Servo punching unit with programmable part recipes, part counting, punch break detection, and enclosure protection.
Deburring machine
Single-station deburring machine with servo head, indexed positioning, pneumatic clamping, and automatic feeding.
Representative technical parameters
Typical reference data for early technical review and RFQ alignment.
| Machine | Workpiece Range | Output / Key Capability | Utility / Control Notes |
|---|---|---|---|
| Tapping machine | Diameter Φ4.24-Φ6.65 mm, length 10-30 mm | 10 pcs/min, tapping up to M6, 5 workstations | Mitsubishi PLC FX5U-64MT/ES, 380V, 0.5-0.7 MPa, approx. 2200 kg |
| Drilling machine | Bolt codes metric -4 to -12, inch -5 to -14, length 10-60 mm | ≥850 pcs/hour, spindle speed up to 5000 rpm | KND K1000TF1i, 380V, 0.5-0.7 MPa, approx. 1500 kg |
| Square punching machine | Typical codes YSA/HB/GJB: -4 to -8, J10: -5 to -10, length 10-60 mm | ≥3600 pcs/hour without punch replacement | Mitsubishi PLC FX5U-32MR/ES, 380V, 0.5-0.7 MPa, approx. 1100 kg |
| Deburring machine | Diameter Φ3.97-Φ8.05 mm, length 10-60 mm | 800 pcs/hour, drilling capability up to Φ3 | Mitsubishi PLC FX5U-64MT/ES, 380V, 0.5-0.7 MPa, approx. 900 kg |
Shared advantages
- Automatic lubrication for guideways and ball screws.
- Touch-screen operation with fault display and alarm logic.
- Automatic part counting for total and shift output.
- Full enclosure for operator safety and containment.
Typical inquiry scenarios
- High-value fasteners When consistency, tool monitoring, and traceable output matter.
- Automation upgrades When manual feeding must be reduced and takt stabilized.
- Mixed material parts When titanium, high-strength steel, stainless steel, or heat-resistant alloys need dedicated process control.
Need a fastener machine around your own standards and part codes?
Share part drawings, material grades, hole or thread specifications, and output target. We can advise whether a single machine or a grouped cell is more suitable.